headstock bearings and seals yamaha it125 it 125 1980 1984 Kawasaki ZX-6R This ignition coil is manufactured

This ignition coil is manufactured to replace the original coil pack on a Suzuki GSF400 for the years and models shown above

This top end rebuild kit has been designed to replace the factory top end on a Yamaha RD350 for the years and models shown above

This set of blue series brake pads will fit the front and rear brake on a Yamaha FZR600 for the years and models shown above

If you need to change the bush's you can use your old ones

headstock bearings and seals yamaha it125 it 125 1980 1984 Kawasaki ZX-6R This ignition coil is manufacturedBrand new set of headstock steering bearings and seals to fit: Yamaha IT 125 (1980 1984). This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Yamaha IT125 for the years and models shown above. Top sized: 25mm x 43mm x 12mm. Bottom sized: 30mm x 48mm x 12mm. All sizes set out ID x OD x Thickness. The seals are not included in the measurements. The seal thickness is